User's Manual

SAFETY TRAINING INFORMATION
Your FUJIAN NAN'AN BAOFENG ELECTRONICS CO., LTD. radio generators RF electromagnetic energy
during transmit mode. This radio is designed for and classified as KĐĐƵƉĂƚŝŽŶĂů Use KŶůLJ meaning it must be used only
during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is
NOT intended for use by the 'ĞŶĞƌĂů WŽƉƵůĂƚŝŽŶ in an uncontrolled environment. This radio has been tested and complies
with the FCC RF exposure limits for KĐĐƵƉĂƚŝŽŶĂů Use KŶůLJ Inaddition , your FUJIAN NAN'AN BAOFENG ELECTRONICS CO.,
LTD. radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels
and evaluation of such levels for exposure to humans:
󰩞
FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure
to Radio Frequency Electromagnetic Fields.
󰩞 American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human
Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
󰩞 American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of
Potentially Hazardous Electromagnetic Fields± RF and Microwave.
󰩞 The following accessories are authorized for use with this product. Use of accessories other than those (listed in the
instruction) specified may result in RF exposure levels exceed the FCC requirements for wireless RF exposure.
To ensure LJŽƵƌĞLJŽƵƌ expose to RF electromagnetic energy is within the FCC allowable limits for occupational use, always
adhere to the following guidelines:
󰩞
DO NOT operate the radio without a proper antenna attached, as this may damaged the radio and may also cause
you to exceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or antenna
specifically authorized by the manufacturer for use with this radio.
󰩞 DO NOT WUDQVPLWVIRUPRUHWKDQRIWRWDOUDGLRXVHWLPH³GXW\F\FOH´7UDQVPLWWLQJPRUHWKDQRIWKH
time can cause FCC RF exposure compliance requLUHPHQWVWREHH[FHHGHG7KHUDGLRLVWUDQVPLWWLQJZKHQWKH³7;LQGLFDWRU´OLJKWVUHG
<RXFDQFDXVHWKHUDGLRWRWUDQVPLWE\SUHVVLQJWKH³377´VZLWFK
󰩞 ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting and only use the belt-clip
which is listed in instructions when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirement s are not
exceeded. To provide the recipients of your transmission the best sound quality, hold the antenna at least 5 cm (2 inches) from your mouth,
and slightly off to one side.
T
he information listed above provides the user with the information needed to make him or her aware of RF exposure,
andwhattodotoasͲsure that this radio operates with the FCC RF exposure limits of this radio.
Electromagnetic Interference/Compatibility
During transmissions, your FUJIAN NAN'AN BAOFENG ELECTRONICS CO., LTD. radio generates RF energy that can possibly
cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are
posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals,
aircraft, and blasting sites.