User's Manual

Icon Description
CT ‘CTCSS’ activated.
DCS ‘DCS’ activated.
+ Frequency Shift +
- Frequency Shift -
+ - Frequency offset direction for accessing repeaters.
S Dual Watch/Dual Reception functions activated.
VOX Function ‘VOX’ enabled.
R Reverse function activated.
N Wide Band selected.
Battery Level indicator
Keypad lock function activated.
L Low transmit power.
▲▼ Operation frequency.
Signal Strength Level.
188 Operating channel.
75/25
10.1750HzTONEFORACCESSTOREPEATERS:
The user needs to establish long distance communications through an amateur radio repeater
which is activated after receiving a 1750 Hz tone. Press and hold on the 【PTT】,then press the 【F】
button to transmit a 1750Hz tone.


11.BASICOPERATION:
11.1.RADIOONOFF/VOLUMECONTROL:
-Make sure the antenna and battery are installed correctly and the battery charged.
-Rotate the knob clockwise to turn the radio on, and rotate the knob fully counter-clockwise until a
‘click’ is heard to turn the radio off. Turn the knob clockwise to increase the volume, or
counter-clockwise to decrease the volume.
11.2.SELECTINGAFREQUENCYORCHANNEL:

Press the key 【▲】or【▼】to select the desired frequency/channel you want. The display shows
the frequency / channel selected.
-Press and hold down the key 【▲】or 【▼】for frequency up or down fast.
Note:
- You can not select a channel if not previously stored.

