User's Manual

-Press the 【F】button, to activate the FM Radio on; Press it again to deactivate the FM Radio.
-Press and hold on the 【F】button, to activate the alarm function; Press and hold it again, to
deactivate the alarm function.
SKSIDEKEY2/【M】:
-Press the 【M】button, to turn on the flashlight; Press it again to turn off. Press and hold on the 【M】
button, to monitor the signal.
-COPYING
Connecting the two radios with special data cable, press and hold SKSIDE KEY2/【M】(or
numerical key 2 or 3), then power on, you will see ‘ COPYING’ on the LCD, that means data is
being copied from one radio to another.
FUNCTIONKEYPAD:
-【MENU】key:
-To enter the menu of the radio and confirm the setting.
- Press and hold 【MENU】button, then power on, to switch the frequency mode and channel mode.
-【▲】【▼】key:
-Press and hold 【▲】or 【▼】key for frequency up or down fast.
-Press 【▲】or 【▼】key, the scanning will be opposite.
-【EXIT/AB】key:
-To cancel /clear or exit.
- While standby, press 【EXIT/AB】key to switch between Channel A and Channel B.
-Under FM radio mode, press【EXIT/AB】key to switch the FM radio band 65-75MHz/76-108MHz.
NUMERICKEYPAD:
‐Usedtoenterinformationforprogrammingtheradio’ slistsandthenon‐standardCTCSS
‐Undertransmissionmode,pressthenumerickeytosendthesignalcode(thecodeshouldbesetbyPCsoftware).


ACCESSORYJACK:
-The jack is used to connect audio accessories, or other accessories such as programming cable.
9.‘LCD’DISPLAY:
The display icons appear when certain operations or specific features are activated.