User's Manual

-Press the 【*SCAN】key for 2 seconds to start scanning(frequency/channel).
- While FM radio being activated,press the 【*SCAN】key to search FM radio station.
-While setting the RX CTCSS/DCS, press the key 【*SCAN】to scan the RX CTCSS/DCS.

KEY:
-Under channel mode, press key to switch High/Low transmit power.
-Press key for 2 seconds to lock/unlock the keypad.
FUNCTIONKEYPAD:
-【MENU】key:
-To enter the menu of the radio and confirm the setting.
-【▲】【▼】key:
-Press and hold 【▲】or 【▼】key for frequency up or down fast.
-Press 【▲】or 【▼】key,the scanning will be opposite.
-【EXIT】key:
-To cancel /clear or exit.
NUMERICKEYPAD:
‐Usedtoenterinformationforprogrammingtheradio’ slistsandthenon‐standardCTCSS
‐Undertransmissionmode,pressthenumerickeytosendthesignalcode(thecodeshouldbesetbyPCsoftware).


ACCESSORYJACK:
-The jack is used to connect audio accessories, or other accessories such as programming cable.
9.‘LCD’DISPLAY:
The display icons appear when certain operations or specific features are activated.
Icon Description
188 Operating channel.