User Manual

33
2. Channel Settings
Channel configure function is used to modify the current channel
parameters, on digital channel, it allows you to modify Channel Name, Sending
Timeout, RX/TX frequency, Color Code, Slot Selection, Encrypt Setting, TX
contacts, RX Group List; on analog channel to modify Channel Name, Sending
Timeout, RX/TX frequency, Subsonic, Single Freq Repeater and AD Hoc
network.
●
Channel Name: To set current channel alias, it contains 16 characters at
most.
●
Sending Timeout: To set current channel TOT, the available time range is 15
to 495, the time 0 is off.
●
TX/ RX Frequency: To set TX or RX frequency of current channel, and only
current channel display frequency that this option is available.
●
Subsonic: To set the RX or TX subsonic type and values of current channel
Color Code: To set current channel color code, the available value range is
0~15, if enable TDMA direct mode feature, the color code range is 0~14.
●
Slot Selection: To set current channel time slot, the available time slot is: Slot
1, Slot 2, Virtual Cluster TX slot Auto, Virtual Cluster TX slot 1, Virtual Cluster
TX slot 2;
●
Encrypt Setting: To set the encryption feature of current channel, if enable
encryption feature, the icon appears, and you can add encrypt key or select
a encrypt key from the encryption key list.