User Manual

Direct Mode
w
If enable direct mode feature you can transmit with different frequency directly,
only the transmitter and receiver are set direct mode simultaneously and the
TX frequency of the transm
receiver, you can directly communicate in DM mode.
Single Frequency Re
The radio supports single frequency re
the icon: appears.
T
in direct mode to receive services on one time slot and then forwards them on
the other, using the same frequency and code.
expands the
communication coverage and saves
To enable
or disable the single frequency repeater feature, do as follows:
1. Go to MENU
Settings
Off
and then select On or Off.
2. Press the programmable button programmed as [Single Freq
Repeater] to enable or
disable it.
Note:
● The
voice frame check feature must be ticked of current channel if
frequency repeater
feature will be enabled
41
with Different Frequency
If enable direct mode feature you can transmit with different frequency directly,
only the transmitter and receiver are set direct mode simultaneously and the
TX frequency of the transmitter is the same as the RX frequency of the
receiver, you can directly communicate in DM mode.
Single Frequency Re
peater Feature
The radio supports single frequency re
peater
feature, with this feature enabled,
T
he single frequency repeater
feature allows the radio
in direct mode to receive services on one time slot and then forwards them on
the other, using the same frequency and code.
I
n this way, the feature
communication coverage and saves
frequency resources.
or disable the single frequency repeater feature, do as follows:
Settings
Channel Settings
Single Freq Repeater
and then select On or Off.
2. Press the programmable button programmed as [Single Frequ
disable it.
voice frame check feature must be ticked of current channel if the single
feature will be enabled
;
ith Different Frequency
If enable direct mode feature you can transmit with different frequency directly,
only the transmitter and receiver are set direct mode simultaneously and the
itter is the same as the RX frequency of the
feature, with this feature enabled,
feature allows the radio
in direct mode to receive services on one time slot and then forwards them on
n this way, the feature
frequency resources.
or disable the single frequency repeater feature, do as follows:
Single Freq Repeater
 On/
u
ency
the single