User Manual

2. View / Edit
Allow a user to view/
edit the scan list via menu
group members or add a new member to the scan list, the list contain 16
channels at most.
Also you can edit the members as priority channel,
indicates priority channel 1,
contain two priority channels at most.
Roam
This feature allows the radio communicate between available sites in the IP
Site Connect system. If enable, the radio can communicate via any site in the
IP Site
Connect system, thus ensuring seamless communication in the system.
If current channel enable roam function, icon
LED indicator flash red. On roaming channel, enter roaming menu can enable
or disable it, set site lock or unlock,
Note:
allows the user to associate
but can’
t enable both feature at the same time.
Zone
The radio supports up to
1024
channels supported.
programmed [Zone Up] [Zone Down] key to select a zone.
Note: The radio contains 2 zones at least that you can switch a zone.
28
edit the scan list via menu
,
allows a user to view the scan
group members or add a new member to the scan list, the list contain 16
Also you can edit the members as priority channel,
indicates priority channel 1,
indicates priority channel 2, each scan list may
contain two priority channels at most.
This feature allows the radio communicate between available sites in the IP
Site Connect system. If enable, the radio can communicate via any site in the
Connect system, thus ensuring seamless communication in the system.
If current channel enable roam function, icon
appears, during roaming,
LED indicator flash red. On roaming channel, enter roaming menu can enable
or disable it, set site lock or unlock, and start roam automatically.
allows the user to associate
one of
a scan list or roam list to the current channel
t enable both feature at the same time.
The radio supports up to
128 zones, each of zone supports 64
channels, totally
channels supported.
Enter “Zone”
menu to select a desired zone
programmed [Zone Up] [Zone Down] key to select a zone.
Note: The radio contains 2 zones at least that you can switch a zone.
allows a user to view the scan
group members or add a new member to the scan list, the list contain 16
Also you can edit the members as priority channel,
indicates priority channel 2, each scan list may
This feature allows the radio communicate between available sites in the IP
Site Connect system. If enable, the radio can communicate via any site in the
Connect system, thus ensuring seamless communication in the system.
appears, during roaming,
LED indicator flash red. On roaming channel, enter roaming menu can enable
and start roam automatically.
a scan list or roam list to the current channel
,
channels, totally
menu to select a desired zone
or