User's Manual

to follow, after send emergency information, you voice and background noise

to be transmitted automatically as you don’t need to press PTT key within hot

MIC duration.

Note: while the short press is set as emergency on, the long press will be set

as emergency off default.

Time Out Timer (TOT)

The purpose of TOT is to prevent any user occupy a channel for an extended

period. If a channel is busy, the time will be shorter. If the preset time expires,

the radio will generate beep and terminate transmission automatically. Via

programming software, you can set TOT as 15-495 second.

Via programmable software to set it: Channels folder → Zone → A digital or

analog channel → TX Parameters → TOT-TOT Rekey Delay

Voice Encryption

The voice encryption can encrypt your audio signals to guarantee the privacy

of your communication, via the programming software user can select

encryption type as static or dynamic. If the encrypt feature is enabled, the

transmitter and receiver will be set as the same encryption type and same

voice encryption key, otherwise the receiver is mute.

Via programmable software to set it: General Settings folder → Voice

Encryption Type→ Voice Encryption Key