User's Manual

21
radio located at a close place please select Low power to save battery. Press
the programmed High/Low Power key to switch between high power and low
power. Switch to high power, a “high power” sounds; switch to low power, a
“low power” sounds.
Press programmed High/Low power key to switch power level or select power
level via programming software
Via programmable software to set it:
Channel folder
→
Zone
→
a digital or analog
channel
→ TX Parameters →
Power Level
Squelch Level
On analog mode, this feature allows you to adjust the squelch threshold for the
radio to receive audio. You can set squelch level as 0~9. High level requires
stronger signal for the radio to un-mute.
Via programmable software to set it:
Channel folder
→
Zone
→
an analog channel
→Squelch
Level
Digital Emergency
In case of an emergency you can enter emergency mode to ask for help, short