User's Manual

30
Note：To enable this function, TX frequency should be different from RX frequency, and the channel
will set as allow talk around on the programming software.
●Tone/Alerts: To set tones for your radio, tone alerts include settings of all tones,
call alert tone, message tone, keypad tone. If disable all tones, all alerts will be off
except emergency
tone.

●TX Power : Allow a user to change the power level, there are two levels available:
high ( indicated by H) and lower(indicated by L).
●Backlight: To set the backlight parameters, you can select on or automatic , while
you select automatic on ,the light will become dark after 5 second you don't operate
the key, and the light will keep on all the time when the backlight is on.
●Boot Interface: Allow a user to enable or disable the boot screen via menu. If the