User's Manual

22
While select a contact as private call ，the screen displays as following, a private
call can view its detail、send call alert 、send message、edit name or number 、delete、
send device check、disable or enable、send remote monitor.

●Call Alert： Call alert is used for prompting the private receiver; ask them respond to
transmitter if communication is available. While receiving call alert command the radio
will generate alert tone.
●Device Check：This function can check if the target radio is active in the system while
don’t send any tone alert to the target radio. When the radio is available, the screen
displays: target radio has replied, while the radio is unavailable, the screen displays:
fail!
●Remote Monitor: Allow a user to send a "Remote Monitor" request to the target
device via menu. If the request is successful, you can enable the microphone of the
target radio, and monitor its activities. Only the target radio is set remote monitor
decode, that enable monitor its activities.
●Device enable : Allow a user to send "Device enable" command to the target killed
device, to allow it to be used normally.
●Device Disable: Allow a user to send "Device Disable" command to the target device