User's Manual

9
VOX on
Plug in headphone
Direct /talkaround mode
Duplex mode on
Monitor
Linked Computer
Battrty Capaticy
Green: means the battery is sufficient green :
Yellow :battery capacity is medium，Red:
Low battery
Turning the power on /Turn off
Rotate the Power switch/volume adjust keys clockwise to turn the power on .。
Rotate the Power switch/volume adjust keys anti-clockwise to turn the power off .
Adjusting the volume
After the radio is power on, you can rotate the Power switch/volume adjust keys to adjust the
volume level, Rotate the knob clockwise to increase the volume ,Or rotate the knob anti-clockwise
to decrease the volume.
Selecting a Channel
Turn the Channel Selector Knob to select channel 1to 16,Make sure the white line on the knob
points at the desired channel number.
Note:
●
If a channel is available, there will be a channel No ;
If a channel is not programmed, the display shows：unprogrammed，also with a beep.
Transmitting
1,make sure the channel you use is not occupied by other radio.
2.Press and hold down the PTT key, than speak into the microphone.
3 Please keep the microphone 3~4cm away from you, speaking with normal voice .
4 Press the PTT buttom, LED indicator glows red ,means transmittance.
5.Release the PTT key to receive.
Receiving
When a call is received successfully, the LED indicator glows green ,on the condition that you
received the correct decode. Corresponding icon（Private Call/ Group Call / All Call）and ID or
name will be displayed.
When a Private Call or Group Call is received, you may press the PTT key to call back.
On analog channel：
While received weak signals and the radio sets high SQL,the receiving party will fail to receive