User's Manual

6
Please remove the battery timely when the battery is fully charged.
Notes: While the battery is charged ,the ambient temperature must be within 0~40, Temperature
out of the limit may reduce working life or Charging efficiency.
charging steps
1.Place the battery or the radio is attached with a battery in the charger.
2.Plug the AC connector of the switching power into the outlet socket.
3.Macking sure the battery is connected to the charger, The charging process initiates when the
charger indicator glows red.
4.The charger indicator glows green when the battery is fully charged.
Note: Make sure the battery is connected to the charger ,But the charger indicator not glow,
Maybe the battery /charger has damaged or temperature out of the limit.
Attaching/Removing the belt clip
Attach the belt clip using the two supplied3*4mm binding screws.
Attaching/Removing the strap
Thread the hand strap to the loop on the right and back of your two-way radio.)
Attaching the Speaker/Microphone
Open the accessory jack cover, then align the plug with the accessory jack and tighten the screw
on the plug.
About the radio