User's Manual

●LED indicator: To set whether to enable LED indication via menu.While disable all indicator ,

the screen becomes dark and Tx red indicator, Rx green indicator ,scan orange indicator are off.

Please use this function with due care.

●Allow a user set radio in talkaround mode via menu. While enable talkaround function,the

screen displays: ，By this time TX frequency the same as to RX frequency。

Note：to enable this function, TX frequency should be different from RX frequency, and the

channel will set as allow talkaround on the programming software.

Application:

1)Within in communication range of the two-way radio, when long time communication is

required, to avoid busy repeater, you can invite the other party to communicate in the same

frequency in talkaround mode.

2) Communicate in the effective coverage range of the repeater.

Note: exit from the talkaround mode after communication, otherwise, you may be unable to

communicate with other members in the network.

●While this function is enabled, you can enjoy hands-free communication .The radio will

automatically begin transmitting when you speaking,And terminate transmitting when you stop

talking with no need of PTT press. Allow user to set the vox level(level 1-8) and VOX

delay(0.5~10second) via menu.VOX on the screen displays : .

Note: This feature can

Note：The VOX function only be used if you are using a supported headphone.