User's Manual

This function convenient to user dial to linkman while it don't store in the address list . Allow user

input the Private Call ID number through the number key,After you input the ID number ,then

press PTT key to transmit.Or press key to select call alert ,device check, remote

monitor ,device enable ,device disable to operate.

②Scan

●Scan on /off

Allow user to enable or disable scan function for the current channel via menu. Scanning allows

the device to search the scan list connected to the current channel to locate qualified channel for

receiving or voicing. While scan on ,the screen display ,and LED Indicator flashes orange.

Scan off:Press Menu key to reaccess the scan list ,and select Turn off then press –key to store the

setting .

●View/Edit list

Revive                                              

                                                 

                         Allow a user to view/edit the scan list via menu,

"View Member" allows a user to execute some operations to the scan list, such as viewing the scan

member ,changing priority of scan member, deleting a member from the scan list;Add Member

allow a user to add a new member to the scan list or editing priority of scan member. It is not

allowed to create a new scan list or delete existing scan lists from the device.Digital and Analog

channel will be appear in the same scan list.

Zone selection (This operation can be valid when there are more than 2 zones.)

The radio supports up to 50 zones, each of zone supports 16channels, totally 160 channels

supported.When a desired zone is selected, the screen prompts you with "selected" and display