User's Manual

12
Note: while the contacts item add in the default address or one touch call ,That you will unable to
delect the item。
Extend Function
Call Alert: Allow user to transmit a call alert through the menu . Call Alert is used for prompting
the receiver, ask them respond to transmitter if communication is available. The user can receive
alert tone Only when a channel is available. On digital mode, a radio only transmit call alert to the
other.
Device check: This function can check if the target radio is active in the system while don’t send
any tone alert to the target two-way radio.When the radio is available ,the screen displays:target
radio available,while the radio is unavailable，the screen dislays：targat radio not activate.
Device revive : Allow a user to send "Device enable" command to the target two-way radio via
menu. "Device Enable" command is used to enable disabled target device.
Device disable: Allow a user to send "Device Disable" command to the target device via menu. If
the device is lost or stolen, a user can use this function to disable the device. However, this device
will continue monitoring air interface to receive its "Device Enable" command.
Remote monitor: Allow a user to send a "Remote Monitor" request to the target device via menu.
If the request is successful, the MIC and transmitter will be enabled for the target device for
remote monitor.
(Group call)（ ）