User's Manual

incoming calls.

CTCSS/CDCSS may set by your local distributor. When the channel is set with CTCSS/CDCSS,

the user can only receive the calls on the same channel with same CTCSS/CDCSS.

Button setting

For enhanced convenience, you may program the keys SK1, SK2, SK3, short and Long press of a

key can be assigned with different functions.

Programmable keys are including functions listed below:

●Unassigned：this key is not assigned with any function.

●1-6：One touch call 1~6：Allow user to initiate digital group call, digital private call, call alert or

send quick message via the One Touch Call function.

●Manual dial：You can manually input the private call number for calling .

●Monitor：enable monitor function.

●Emergency on/off: Allow user to make an emergency call.

Note: this function can only be set to the orange key,While the short press be set as emergency

on,the long press will be set as emergency off default.

Backlight automatic on/off: This function can let user to make the backlight to automatic on or

still on . the light will keep on all the time when the backlight on, ,while you select automatic

on ,the light will become dark after 5s you don't operate the key.

●：keypad Lock: when the whole keypad was locked. only the PTT key and side keys are

valid .Press this button again or press MENU +# key to unlock.

● Scan on/off: Allow user to enable or disable the scan function.

●All alert tone on/off: Allow user to enable or disable all alert tones.

●Massage: This function allows you to enter SMS shortly and conveniently.

●Zone selection：This function enables you to select any zone among all the 50 zones. .

●Address list：This function allows you to enter Address list promptly

●Revice ：this can allow you to revive other radios.

●Kill：This can allow you to kill other radios.。

●Device self-inspection： This can enable the device to self-inspection.

●Remote monitor：enable remote monitor function.

●High/low power：Allow user to switch between high power and low power.

●Repeater/talkaround ：allow radio set to connect through repeater or achieve standalone

communication in talkaround mode.

●VOX on/off: This function will convenient to enable VOX function.The default level is 3,and

the VOX delay is 3.0 sec.

Note:The VOX function shall work with a dedicated headphone.