User's Manual

20
call type select call alert, then the programmed key set as one touch call, press
the programmed key to send call alert to a private call.
Talk around
Talk Around: When your repeater malfunctions, or when radio is out of
repeater’s range, you can continue to communicate in talk around mode. While
enable talk around feature, by this time TX frequency the same as to RX
frequency. Press the programmed Repeater/Talk Around key to switch
between repeater modes and talk around mode. Switch to talk around, a “talk
around” sound; switch to repeater mode, a “repeater” sounds.
Via programmable software to set it: Channel folder → Zone → a digital or analog
channel
→ Allow Talk Around
Note：To enable this function, TX frequency should be different from RX frequency, and
the channel will set as allow talk around on the programming software.
Squelch Level
On analog mode, this feature allows you to adjust the squelch threshold for the
radio to receive audio. You can set squelch level as 0~9. High level requires
stronger signal for the radio to un-mute.
Via programmable software to set it: Channel folder → Zone → an analog channel
→Squelch Level
Digital Emergency
In case of an emergency you can enter emergency mode to ask for help, short
press programmed “Emergency on” key to send emergency information, To
exit emergency mode, long press “Emergency off”. On regular type alarm, after
send emergency information then receive ACK command or the alarm cycles