User's Manual

23
Maximum 495 sec (for digital channels in Portables and Mobiles)
13. TOT Rekey Delay (sec)
Sets the amount of time that the radio waits on a channel after the Time-Out Timer (TOT) expires
(which stops the radio transmission) before allowing the user to transmit again. This is a
channel-wide feature.
Range
Maximum 255 sec Minimum 0 sec Increment 1 sec
14. Admit Criteria
Determines when voice or data is allowed to be transmitted on the channel. This is used to prevent a
radio from transmitting on channels that are already being used. If the radio has different transmit and
receive frequencies, only the receive frequency is monitored for activity. If no activity is found on the
receive frequency, the radio allows the user to transmit on the transmit frequency even if it is being
used.
Options
▼Always: The radio will always transmit when the Push-to-Talk (PTT) button is pressed. This option is
also referred to as "Impolite" channel access.
▼Channel Free: The radio will check for an idle channel prior to allowing a transmission. This option is
also referred to as "Polite to All" channel access.
▼Color Code Free: The radio will check if the specified Color Code is not in use prior to allowing
transmission (except for Group Calls that are already in progress). This option is also referred to as
"Polite to Own Digital System" channel access (for Digital channels only).
Scan
Adding Scan Lists
A Scan List is a grouping of channels to be monitored for transmission activity. When this list is
attached to a channel (Channels->Scan List), the radio searches the list for an eligible channel to
receive or unmute during a scan operation. This is also known as a Channel Scan. A maximum of 32
scan lists can be created. Each list can contain a maximum of 15 members.
1. To add a Scan List:
Right-click the Scan folder of the Tree View.
Select Add->Scan List.
Give the list a unique name.
2. Deleting Scan Lists