User's Manual

5. Remote Monitor

Allows the user to initiate a Remote Monitor request to the target radio via the menu. Upon a

successful request, the target radio's microphone and transmitter will be activated to be remotely

monitored.

6. Radio Disable

Allows the user to initiate a Radio Disable command to the target radio via the menu. Upon a

successful request, the target radio will disable all its user interfaces (e.g. all LED indicators

including Backlight, alert tones, user inputs including PTT except for Volume/On/Off knob on

Portable and Power On/Off button on Mobile), ignore Emergency alarms and received data to radio

or external devices, mute received voice to radio or external device and disallow transmission of

data or command from the radio or external device. This disables the radio if it is lost or stolen.

However, the radio continues to monitor the air interface to enable it to receive the Radio Enable

command.

7. Radio Enable

Allows the user to initiate the Radio Enable command to the target radio via the menu. Radio

Enable is used to enable a target radio that is disabled (inhibited).

Radio mark explaination

H/L High/low output

E2 Repeater mode

E3 Multi-channel mode

Keypad lock

Access authorization

Missed Calls

Missed SMS

SMS full

Speaker open

Speaker close

Signal strength bar

Voice sign

Scan

●Allows the user to toggle Scan on or off via the menu for the current channel. Scan allows the radio

to search the scan list that is attached to the current channel for an eligible channel to receive or

unmute.

●Edit List

Allows the user to edit the Scan List via the menu. The Edit List allows the user to perform certain