User's Manual

n Use of Lithium Battery
l Charge the battery pack before use.
l To try to reduce discharge of the battery pack, remove it from the product when it is left
unused and store it in a cool and dry place.
l If the battery pack is left unused for a long time:
1 Remove it from the product.
2 If possible, discharge the battery pack.
3 Store the battery pack in a cool and dry place (lower than 25°C).
n Characteristics:
l The capacity is gradually reduced after repeated charging and discharging.
l It is also aged if left unused.
l It requires longer charging time in a cool place.
l Charging in a heat place will shorten its service life. It is aged more quick if stored in a
heat place. Do not leave the battery pack in a car or next to a heating unit.
l If its service time shortens, even though it is fully charged, replace it with a new one.
Continuous charging and discharging will result in leakage of the electrolyte.
Charging
After the BF-P108 charger is energized, the orange indicator is not on. Install the battery pack,
contact properly, and then the red indicator is on to start charging. After the battery is fully
charged, the green indicator is on. If the temperature is beyond the range during charging, the
orange indicator flashes; if the battery is damaged or poorly contacted, the red indicator flashes.
n Installation/Removal
1. Gently press the battery pack into the rear of the product and push horizontally it till you
hear “click” until the battery is locked by the latch at the bottom of the rear of the
product.
u Do not have battery terminals short circuited and do not put the battery in the fire.
u Do not remove the case of the battery pack.
u Do not install the battery pack in a dangerous environment; otherwise, spark may result in
explosion.