Instruction Notice

1. Power on/off
Long press the power button, the walkie-talkie will make "Beep" sound, andthe
host self-check screen will show "L" after starting up.
Under the power-on state, long press the power button, the walkie-talkie will
make a "beep beep" sound to close.
2. Transmit/receive
Press and hold downthe PTT key or TALK button to launch, speak tothe
MIC.
Release the PTT key to receive.
3. Double Channels Monitoring
In conventional standby mode, the terminal monitors two waiting channels
(primary channel + secondary channel), and PTT Key and TALK button key
transmit to the primary channel by default.
4. Main channel switch
In standby mode, the large number on the screen indicates the current
main channel number, andthe small number indicates the current main
channel subtone.In standby mode, press [OK], the channel number flashes,
select the channel, press [↑/↓] to lock the channel and enter the channel
subtone setting, press [↑/↓] to switch CTCSS/CDCSS (serial number 0 means
no CTCSS/CDCSS), press [OK] to confirm.