Instruction Notice

8. Scanning
Through the menu operation, select the scan function (scan icon on the
broken code screen ), press [OK] to enter/exit the scanning mode and
scan all the configured channels.When a voice signal is scanned in a channel,
the loop scan is continued after the end of receiving and after 3 seconds in the
channel.
Before the scanning function is turned off, the scanning icon on the screen
should always be on, and press the PTT key within 3 seconds to specify the
reply to the active channel.
9. Monitor
Through the menu operation, select the monitor function (monitor icon is
displayed on the broken code screen ), press [OK] to confirm that the
monitoring function is on/off, and continue to monitor [main channel] selected
by default.
10. Keyboard lock
In standby mode, long press [OK] keyboard lock key to open/unlock
keyboard operation (lock icon on broken code screen) ), SOS Key,PTT Key
and TALK button are not affected by keyboard lock and can be operated at any
time.