User's Manual Part 2

Saja Operation Manual A-55
10/12/00
Appendix.fm Appendix
Appendix I Installing/removing the side cover
When installing an option into the printer, you must remove the side cover.
The following describes how to install or remove the side cover.
Caution:
Before installing or removing the option, be sure to turn the
power switch of the printer off, to prevent danger of electric
shock.
Removing the side cover
1. Set the power switch on the right side of the printer to [ O ] to turn off
the printer.
Then disconnect the power cord from the AC outlet.
Important: Installing the HCF unit while the printer is turned on may
result in malfunction.
2. Slide the cover on the left side of the printer towards the left.