User's Manual Part 2

A-50 Saja Operation Manual
10/12/00
Appendix Appendix.fm
10. Load paper into the HCF unit.
Reference: For details on how to load paper, see “Appendix H Load-
ing Paper into the HCF Unit”.
11. Insert the cassette completely the printer. Make sure the cassette is
properly seated.
12. Insert the plug of the power cord into the AC outlet. Set the power
switch on the right side of the printer to [ I ] to turn on the printer.
Check the display and make sure the printer is ready for printing.
Important: If an error message is shown, see “4.3 Error Messages”.
Removing the HCF unit
To remove the HCF unit, proceed as described below.
1. Set the power switch on the right side of the printer to [ O ] to turn off
the printer.