User's Manual Part 2

Saja Operation Manual A-31
10/12/00
Appendix.fm Appendix
Appendix E Using the Optional HCS Unit
The optional large capacity stacker, when installed to the printer, can hold
up to 1,000 sheets of printouts in the printer, which is handy when doing
large volume printing.
Caution:
Before installing or removing the HCS unit, be sure to turn
the power switch of the printer off, to prevent the danger of
electrick shock.
Installing the HCS unit
To install the HCS unit, proceed as described below.
1. Set the power switch on the right side of the printer to [ O ] to turn off
the printer. Then disconnect the power cord from the AC outlet and
the printer.
Important: Installing the HCS unit while the printer is turned on may
result in malfunction.