User's Manual Part 2

Saja Operation Manual A-9
10/12/00
Appendix.fm Appendix
Fuser
The fuser is used for fixing toner onto paper, and should be replaced after
printing of 200,000 sheets. However, depending on the operating condi-
tions, the fuser may have to be replaced before that number is reached.
For details on how to replace the fuser, see “3.4 Replacing the Fuser”.
Feed roller (HCF)
The feed roller is used for transporting paper from the High Capacity
Feeder. You need to replace the feed roller after about 200,000 prints.
However, depending on the operating conditions, the replacement may
still be required even though this number has not been reached. See the
“3.5 Replacing the Feed Rollers(HCF)” section for detailed information on
how to replace the feed roller.