User's Manual Part 2

4-34 Saja Operation Manual
10/12/00
Troubleshooting Chapter4.fm
When E8 is shown
When the status code E8 is shown, paper is jammed at the optional HCS
unit.
Clear the paper jam as follows.
1. Open the top cover all the way to the back until it stops.
Warning:
Make sure the top cover is opened all the way to the
back until it stops. (Also, when closing, slowly close the
top cover.)
Important: If printouts still remain in the paper output tray, remove
them before opening the top cover; otherwise paper jam
may result.
Do not touch any parts inside the printer.
2. Pull on the recessed area on the rear cover of the HCS unit to open
the cover, as shown.