User's Manual Part 2

4-24 Saja Operation Manual
10/12/00
Troubleshooting Chapter4.fm
9. Re-insert the fuser and close the rear cover.
Important: Make sure the fuser is securely re-inserted back into the
printer. Otherwise print quality problems may occur.
If the jammed paper could be removed by these steps, proceed to
step 16 to complete the procedure. If there is still jammed paper in the
printer or if the error message does not disappear even after the top
cover is closed, proceed to the next step.
10. Hold both sides of the tray and tilt it slightly. Then, gently lift the tray
up and then pull it towards you.