User's Manual Part 1

Saja Operation Manual 3-29
10/12/00
Chapter3.fm Daily Operations
Cleaning the interior of the printer
After removing a paper jam or replacing the EP cartridge, check the inside
of the printer. Remove any paper scraps and wipe off paper dust using a
dry, clean cloth.
Warning:
Make sure the top cover is opened all the way to the
back until it stops. (Also, when closing, slowly close the
top cover.) If the top cover is not in a steady position, it
may close rapidly and cause injuries to your hands.
Caution:
The fuser becomes very hot in operation. If a paper jam has
occurred, turn the power off and wait at least 40 minutes
before removing the drum cartridge and touching the fuser
section.
Never touch the heater area (where a label indicating high
temperature is located), or else burns may result. If paper is
jammed at the heater or roller area, do not remove the paper
by force; otherwise personal injury may result. Instead,
immediately turn off the power and contact your local dealer
for assistance.