User's Manual Part 1

Saja Operation Manual 3-23
10/12/00
Chapter3.fm Daily Operations
3.5 Replacing the Feed Rollers(HCF)
When it becomes necessary to replace the feed rollers in the optional
High Capacity Feeder(HCF), follow the procedure below.
There are all together three feed rollers. When replacing the rollers, be
sure to replace all of them at the same time.
1. Make sure the PRINT RDY message is displayed on the control
panel.
2. Set the switch on the right side of the printer to the [O] position to turn
the power off.
Important: Do not use cleaning alcohol or other volatile substances,
to prevent the possibility of discoloration, cracking, and
deformation of the printer housing.
3. Pull the front paper tray out a little.