User's Manual Part 1

3-14 Saja Operation Manual
10/12/00
Daily Operations Chapter3.fm
3.3 Replacing the BTR Roller
When it becomes necessary, replace the BTR roller with a new one, using
the procedure described below.
Caution:
Be sure to switch off and unplug the printer before accessing
its interior for cleaning, maintenance, or fault clearance.
Access to a live printer’s interior can cause a shock hazard.
1. Make sure the indication [PRINT RDY] is shown on the display.
2. Set the power switch on the right side of the printer to [ O ] to turn off
the printer. Then disconnect the power cord from the AC outlet.
3. Hold the recessed area and lift to open the top cover.
Warning:
Make sure the top cover is opened all the way to the
back until it stops. (Also, when closing, slowly close the
top cover.)
Important: If printouts still remain in the paper exit area, remove
them before opening the top cover; otherwise paper jam
may result.
Do not touch any parts inside the printer.
PRINT RDY