User's Manual Part 1

2-16 Saja Operation Manual
10/12/00
Installation Chapter2.fm
2.6 Using the Front Paper Tray
To load print media in the printer, proceed as described below.
Important: Insert the paper only after the printer is turned on.
Loading paper into the front paper tray
Reference: For information on paper sizes that can be loaded into the
front paper tray, please refer to “Appendix A Print Media”.
1. Open the front paper tray by pulling the latch at the top center.
Important: The front paper tray opens to an angle of about 80
degrees. Do to exert strong pressure on the tray, and do
not place any heavy objects besides paper on the tray,
to prevent damage.
2. For small-size paper (postcard, etc.), pull out the paper tray. Hold
both sides of the tray and tilt it slightly. Then, gently lift the tray up and
then pull it towards you.