User's Manual Part 1

Saja Operation Manual xiii
10/12/00
Chapter0.fm
Power requirements and earthing connection
Three power specifications are listed below. The specifications
that apply to your machine depend on your machine configura-
tion. Connect the power plug only to a properly rated power out-
let. Otherwise, it can cause a fire or shock hazard. If in doubt,
contact the Xerox Customer Support Centre.
• Rated voltage: 100V
Rated frequency: 50/60Hz
• Rated voltage: 120V
Rated frequency: 50/60Hz
• Rated voltage: 220-240V
Rated frequency: 50/60Hz
Never use multi-plug adaptors to plug multiple power plugs in
the same outlet. Be sure to operate the machine on a sole-use
receptacle. Multiple connectors can cause the outlet to overheat
and cause a fire.
Ensure that the plug connection is free of dust. In a damp envi-
ronment, a contaminated connector can draw a non-negligible
amount of current that can generate heat and eventually cause
a fire over an extended period of time.
Always use the power cord provided with your machine. When
an extension power cord is required, always use a properly
rated cord.
• In Japan: 125V/15A
• In other countries: Contact the Xerox Customer Support
Centre.
If you use a cord with an unspecified current rating, the
machine or plug may emit smoke or become hot to the
touch externally.