User's Manual Part 1

Saja Operation Manual xi
10/12/00
Chapter0.fm
When lifting the machine, get a firm footing and bend your
knees to avoid possible injuries to your back.
The machine has ventilation holes on the rear panel and side
panel. Ensure that the machine is installed with a minimum
clearance of 100mm from its right side to the wall and 200mm
from its left side to the wall and 300mm from the rear vent to the
wall. A poorly ventilated machine can cause excessive internal
heat and a fire. The accompanying diagram shows the mini-
mum clearances required for normal operation, consumables
replacement, and maintenance to ensure your machine oper-
ates at peak performance.
When moving the machine, be sure to unplug the power cord
from the outlet. If the machine is moved with the power cord
connected, it can cause damage to the cord which could result
in a fire or shock hazard.
100
mm
300
mm
760
mm
200
mm