User's Manual

5.2 EP Cartridge
75
5
About Consumables
2
Remove any paper in the center
output tray.
3
Open the top cover.
Do not touch any parts inside the printer.
4
Hold the EP cartridge by the grip and
pull it out slowly.
To prevent the toner from dirtying the floor, lay a
piece of paper on the floor first before putting the
EP cartridge down.
5
Take the new EP cartridge out of the
box and shake it 7 to 8 times in the
manner as shown in the diagram.
z
If the toner is not evenly spread out, the print
quality may drop. Also, if you did not shake the
EP cartridge well, there may be operating noise
or the interior of the EP cartridge may be
damaged during operation.
z
Do not touch the surface of the photosensitive
drum.
Lupin_IOT.book Page 75 Monday, February 24, 2003 10:23 AM