User's Manual

Trou bl eshooti n g | 369
Fog
Bead-Carry-Out (BCO)
2 Replace the drum cartridges. See "Replacing the Drum Cartridges."
If the problem persists, contact Dell.
Problem Action
The printed result is foggy. 1a If you use a non-Dell brand toner cartridge, enable the Non-Dell
Toner option.
a Start the Tool Box, and then click the Service Tools on the Printer
Maintenance tab.
bMake sure that the On check box under Non-Dell Toner is
selected.
If the problem persists, proceed to step 2.
1b If you use a Dell toner, replace the drum cartridges. See "Replacing
the Drum Cartridges."
a After you replace the drum cartridge, start the Tool Box, and then
click Reports on the Printer Setting Reports tab.
bClick Color Test Page.
If the problem persists, contact Dell.
2 Replace the drum cartridge and the toner cartridge with a Dell toner.
See "Replacing the Drum Cartridges."
a After you replace the drum cartridge and toner cartridge, start the
Tool Box, and then click Reports on the Printer Setting Reports
tab.
bClick Color Test Page.
If the problem persists, contact Dell.
Problem Action