User's Manual

98 | Understanding the System Menus
❚ Admin Settings > Network > Wi-Fi>
Wi-Fi Setup Wizard
NOTE:
• Wi-Fi Setup Wizard is available only when the printer is connected using the wireless network.
• Wireless network is available on Dell H625cdw and Dell H825cdw.
Configures the wireless network interface.
❚ Admin Settings > Network > Wi-Fi > Wi-Fi Setup Wizard >
Select access point
Selects the access point from the list.
❚ Admin Settings > Network > Wi-Fi > Wi-Fi Setup Wizard >
Manual SSID Setup
Configures the wireless settings using the operator panel manually.
❚ Admin Settings > Network > Wi-Fi > Wi-Fi Setup Wizard > Manual SSID Setup >
SSID
Specifies a name to identify the wireless network. Up to 32 alphanumeric characters can
be entered.
❚ Admin Settings > Network > Wi-Fi > Wi-Fi Setup Wizard > Manual SSID Setup > SSID >
Infrastructure
Selects when you configure the wireless setting through the access point such as a
wireless.
Acceptable
Low
No Reception
SSID Displays the name that identifies the wireless network.
Encryption Type Displays the encryption type.
WEP Key When you select an access point using WEP as the encryption type,
enter the WEP key.
PassPhrase When you select an access point using WPA, WPA2, or Mixed as the
encryption type, enter the passphrase.
No Security Specifies No Security to configure the wireless setting without
specifying an encryption type from WEP and WPA-PSK-AES.
Mixed mode PSK Selects to configure the wireless setting with the encryption type of
Mixed mode PSK. Mixed mode PSK automatically selects the
encryption type from either WPA-PSK-AES or WPA2-PSK-AES.
Passphrase Specifies the passphrase of alphanumeric characters from 8 to 63.
WPA2-PSK-AES Selects to configure the wireless setting with the encryption type of
WPA2-PSK-AES.
Passphrase Specifies the passphrase of alphanumeric characters from 8 to 63.
(hex: 0-9, a-f, A-F, 16 to 64 characters)
WEP Specifies the WEP key to use through the wireless network. For 64bit
keys, up to 10 hexadecimal characters can be entered. For 128bit
keys, up to 26 hexadecimal characters can be entered.
Transmit Key Specifies the transmit key from Auto and WEP Key 1 - 4.