User's Manual

96 | Understanding the System Menus
❚ Admin Settings > PS >
Paper Select Mode
Specifies the way to select the tray for PostScript Level3 Compatible mode. The change
becomes effective after the printer is turned off and then on again.
❚ Admin Settings > PS >
Default Color
Specifies the color mode to Color or Black. This setting is used for a print job which
does not specify a print mode.
❚ Admin Settings >
PDF
Use the PDF menu to change printer settings that only affect the PDF jobs.
❚ Admin Settings > PDF >
Quantity
Specifies the number of copies to print.
❚ Admin Settings > PDF >
2 Sided Print
Specifies whether to print on one side or both sides of a sheet of print media. For a
two-sided printing, you can specify the printout to be bound by the long edge or short
edge.
❚ Admin Settings > PDF >
Print Mode
Specifies the print mode.
❚ Admin Settings > PDF >
PDF Password
Specifies the password to print a PDF file secured with a password to open the PDF file.
❚ Admin Settings > PDF >
Collation
Specifies whether to sort the PDF job.
Auto The tray is selected as the same setting as in the PCL mode.
Select From Tray The tray is selected in a method compatible with regular PostScript
Level3 Compatible printers.
Normal For documents with normal sized characters.
High Quality For documents with small characters or thin lines, or documents
printed using a dot-matrix printer.
High Speed Prints with the higher speed than the Normal mode, but the quality is
less.