User's Manual

Connecting Your Printer to Mobile Devices | 65
Tap To Print/Scan
Tap To Print allows you to add the printer to a mobile device such as a tablet or a
notebook computer, simply by tapping the mobile device onto the printer. Once the
printer is added to the mobile device, you can start printing or scanning from the mobile
device.
NOTE:
• To utilize the Tap To Print feature, make sure the followings:
- The mobile device should be NFC-enabled and running the Windows
®
8.1 or Windows
®
10
operating system.
- The printer should be connected to a network. If the printer is connected with the computer
only with the USB cable, the Tap To Print feature is not available.
• The Tap To Print feature is available on Dell H625cdw and Dell H825cdw.
Preparations
• Make sure that the Tap To Print feature is enabled.
The Tap To Print feature is enabled as default on the printer.
To enable the Tap To Print feature from the operator panel, perform the following.
NOTE:
• You can set the same setting using the Dell™ Printer Configuration Web Tool. See "Dell™
Printer Configuration Web Tool."
1 Press the (Information) button.
2 Tap the Tools tab Admin Settings System Settings.
3 Tap until NFC - Tap to Print appears, and then tap NFC - Tap to
Print.
4 Tap Enable OK.
5 Turn off the printer, and then turn it on again to apply the settings.
• Make sure that both the printer and the computer are on the same network.
• It is recommended that the computer is connected to the Internet so that the latest
driver could be installed on the computer.
Adding the Printer to the Mobile Device
While the printer is connected to the same subnet of the network with the mobile
device, you can add the printer to the mobile device by tapping the mobile device onto
the printer. The printer is added as a Web Services on Devices (WSD) printer.
The following procedure uses Windows
®
8.1/Windows
®
10 as an example.
NOTE:
• Make sure that the NFC function is activated on the mobile device.
• This is available on Dell H625cdw and Dell H825cdw.