User's Manual

Connecting Your Printer to a Computer | 49
Proceed to step 8.
NOTE:
• A passphrase is an encryption key and may be described on access points or routers. For
details, refer to the manual supplied with the access point or router.
7 Select the encryption type from No Security or WEP.
If you do not set security for your wireless network:
a Tap until No Security appears, and then tap No Security.
b Tap OK.
To use WEP encryption:
a Tap until WEP appears, and then tap WEP.
b Tap the WEP Key text box, and then enter the WEP key.
c Tap Transmit Key, and then select the desired transmit key from WEP Key 1 to
WEP Key 4.
d Tap OK.
8 Turn off the printer, and then turn it on again.
Wireless LAN connection setting is complete.
After the setting is complete, install the software. See "Installing the Software for
Windows
®
Computers" or "Installing the Software for Macintosh Computers."
Changing the Wireless Settings
To change the wireless settings of the printer from your computer, start the Dell Printer
Configuration Web Tool. See "Dell™ Printer Configuration Web Tool."
You can also set the same settings using the Software and Documentation disc.
Connecting to a Wired (Ethernet) Network
Connecting the Ethernet Cable
To connect the printer to an Ethernet network, connect an Ethernet cable into the
Ethernet port on the rear of the printer, and then connect the other end of the cable into
an Ethernet outlet or a hub.