User's Manual

| Turning On/Off the Printer

Turning Off the Printer

NOTE:

• The data in the memory is cleared when the printer is turned off.

Press and hold the (Power) button and select Power Off displayed on the operator

panel.

Setting Initial Settings on the Operator Panel

You need to set the printer language, country, clock date, time, and fax settings when

you turn on the printer for the first time.

When you turn the printer on, the wizard screen to perform the initial setup appears on

the touch panel. Perform the following procedure to set the initial settings.

NOTE:

• If you do not start configuring the initial settings, the printer restarts in 3 minutes, and the Home

screen appears on the touch panel. After that, you can set the following initial setup by enabling

the Power On Wizard on the touch panel from:

The (Information) button Tools tab Admin Settings System Settings

General Power On Wizard.

You can also set the same setting using the Dell Printer Configuration Web Tool.

See "Dell™ Printer Configuration Web Tool."

1 Turn on the printer.

2 Tap until desired language appears, and then tap the desired language.

3 Tap Next.

4 Tap Date & Time.

Geographic Region Time Zone

Africa (UTC) Accra, Bamako, Dakar, Nouakchott

(UTC) Casablanca

(UTC +01:00) Algiers, Douala, Libreville, Luanda

(UTC +01:00) Tunis

(UTC +01:00) Windhoek

(UTC +02:00) Cairo

(UTC +02:00) Harare, Johannesburg, Kinshasa, Tripoli

(UTC +03:00) Addis Ababa, Khartoum, Mogadishu, Nairobi