User's Manual

34 | Connecting Your Printer to a Telephone Line
Connecting Your Printer to a Telephone Line
CAUTION:
• Do not connect the printer directly to a Digital Subscriber Line (DSL). This may damage the
printer. To use a DSL, you are required to use an appropriate DSL filter. Contact your service
provider for the DSL filter.
Connecting the Printer to the Wall Jack
To connect the printer to a telephone line, connect a telephone line cord into the wall
jack connector on the rear of the printer. Connect the other end of the cord into an
active wall jack.
If the phone communication is serial in your country (such as Germany, Sweden,
Denmark, Austria, Belgium, Italy, France, and Switzerland), and a "Yellow" terminator is
supplied, perform the following procedure:
1 Remove the "Blue" plug from the phone connector.
2 Insert the "Yellow" terminator into the phone connector.
To the wall jack
"Blue" plug