User's Manual

Using the Address Book and Phone Book | 295
2 In the Authentication System Settings drop-down list box under Authentication
Type, select LDAP as the authentication method, and then click Apply New Settings.
NOTE:
• When the server you are accessing uses the Kerberos authentication, select Kerberos as the
authentication method. To set the information necessary to access the Kerberos server, enter
the information in Kerberos Server under the Security tab. See "Kerberos Server."
3 Click Restart Printer.
Setting LDAP Server
NOTE:
• When SSL/TLS communication is required to access the LDAP server, select the Enable check box
for LDAP-SSL/TLS Communication in SSL/TLS under the Security tab. See "SSL/TLS."
1 Click Print Server Settings the Security tab LDAP Server.
2 In the IP Address/Host Name & Port text box under Server Information, enter IP
address or the host name, and the port number.