User's Manual
242
|Scanning
You can remove or see details of the recipient, or set the e-mail as Bcc by tapping
+ and the recipient you specified.
4 Tap Sender, and then specify the sender's e-mail address by either of the following:
• If you want to enter an e-mail address directly:
a Tap Keyboard.
b Enter the address using the keyboard.
c Tap Done.
• If you want to select from the address book:
a Tap Address Book.
b Select an e-mail address registered in the address book.
c Tap Done.
• If you want to select from the server address book:
See "Sending an E-mail With the Scanned Data Using the E-mail Server Address
Book."
NOTE:
• For details about address book and server address book, see "Using the Address Book and
Phone Book."
• For details about Network Address Book, see "Using the Server Address Book and Server
Phone Book."
• E-mail addresses need to be registered before you can select Address Book.
5 Tap , and then check and change the scan settings.
See "Scan Settings."
6 Tap Send.
When the document is loaded on the document glass, the screen prompts you to
scan another page.
• If you want to scan another page, place the document, and then tap Continue.
• If you are finished scanning, tap Done.
Managing the Scanner
You can connect the specified scanner, and set the password for the scanner.
Port Settings
When the printer is connected to the computer directly by a USB cable, select USB.
When the printer is connected to the network, select Network. Enter the IP address of
the printer in the IP Address text box, and then click OK.
When the Printer is Connected to the Network
When you are using DHCP for TCP/IP setting for the printer, the image capturing
software may not find the scanner occasionally due to the change of the IP address
allocated for the printer. In this case, check the IP address of the printer, and then
connect the scanner by specifying the IP address.
On Windows
®
, you can check the IP address of the printer using the Dell Printer Hub or
Dell Print Management Tool. Open Dell Printer Hub or Dell Print Management Tool, and
then click Printer information.