User's Manual
Scanning |
239
Setting the Information Necessary to Access the Mail Server
To make the printer to send an e-mail, perform the following procedure:
1 Start the Dell Printer Configuration Web Tool.
See "Starting the Dell Printer Configuration Web Tool."
2 Click E-Mail Server Settings Overview.
3 Set the mail server information as follows:
NOTE:
• In this procedure, the server settings for a Gmail account are used as an example. The server
settings differ for each e-mail service.
• Information about the Gmail account is based on the information as of October 2013. For the
latest information, visit the homepage of Gmail.
a In the Primary SMTP Gateway text box, set the primary SMTP gateway.
For example: smtp.gmail.com
b In the SMTP Port Number text box, enter the SMTP port number.
This must be 25, 587 or between 5000 and 65535.
For example: 587
c In the E-Mail Send Authentication drop-down list box, specify the authentication
method for outgoing e-mail.
For example: SMTP_Auth (Auto)
d In the SMTP Login User text box, set the SMTP login user.
Up to 63 alphanumeric characters, periods, hyphens, underscores, and at
symbols (@) can be used. If specifying more than one address, separate them
using commas.
For example: aaaa@gmail.com
NOTE:
• It is not recommended to share a personal e-mail account with the Scan to Email function
of the printer. Instead, use an e-mail account dedicated to Scan to Email function.
e In the SMTP Login Password text box, set the SMTP account password.