User's Manual

Scanning | 237
When the document is loaded on the document glass, the screen prompts you to
scan another page.
• If you want to scan another page, place the document, and then tap Continue.
• If you are finished scanning, tap Done.
Scanning to a USB Flash Drive
The Scan to USB feature allows you to store scanned data directly to a USB flash drive
attached to the printer without using software.
See "Supported USB Flash Drive."
Procedures
To store the scanned data to a USB flash drive:
NOTE:
• If you insert a USB flash drive to the front USB port first, the USB Drive Detected screen may
appear. In this case, select Scan to USB, and then proceed to step 6.
1 Load the document(s).
See "Loading Documents."
2 Press the (Home) button.
3 Insert a USB flash drive into the front USB port of the printer.
4 Tap Scan to USB.
5 Select a folder to save the scanned data.
See "Specifying a Folder to Save the Scanned Data."
6 Tap , and then check and change the scan settings.
See "Scan Settings."
7 Tap Scan.
CAUTION:
• Do not remove the USB flash drive while the printer is accessing the drive.
The data in the drive may be destroyed, or the drive itself may be damaged and become
unusable.
When the document is loaded on the document glass, the screen prompts you to
scan another page.
• If you want to scan another page, place the document, and then tap Continue.
• If you are finished scanning, tap Done.
8 Remove the USB flash drive from the printer.
CAUTION:
• Make sure that the printer is not accessing the USB flash drive.
Specifying a Folder to Save the Scanned Data
To save the scanned data to a folder in the USB flash drive, specify the folder before
executing the scan job.
1 If folders exist in the USB flash drive, the folder names appear on the touch panel.