User's Manual
234
| Scanning
5 Click Apply New Settings.
Using Address Book Editor
The following procedure uses OS X 10.10 as an example.
NOTE:
• For Windows
®
, you can operate Address Book Editor with using the Tool Box on the Dell Printer
Hub and Dell Print Management Tool. See "Tool Box."
Server Address Enter the name or IP address of the server or computer.
Example:
• For FTP:
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address: 192.0.2.1
• For SMB:
Computer name: myhost
IP address: 192.0.2.1
Share Name Enter the name of the shared folder. See "Creating a Shared Folder
(SMB Only)." For SMB only.
• Example: Share, Sharefolder
Server Path Enter the path of the sub-folder within the shared folder. If you have
not created a sub-folder, leave this blank.
When entering the sub-folder path, make sure that the sub-folder is
already created. Do not enter the name of the shared folder.
Example:
Shared Folder name: MyShare, Second-level folder name: MyPic
Enter "MyPic".
If you have created a sub-folder within a sub-folder, separate each
sub-folder name with a backslash (SMB) or forward slash (FTP).
Example:
Shared Folder name: MyShare, Second-level folder name: MyPic,
Third-level folder name: John
• For SMB enter "MyPic\John".
• For FTP enter "MyPic\John".
Server Port Number Enter the Server Port Number. If you are unsure, you can enter the
default value of 21 for FTP or 139 for SMB.
Available ports are:
FTP: 21, 5000 - 65535
SMB: 139, 445, 5000 - 65535
Login Name Enter the user account name to allow access to a shared folder on
your computer or to an FTP server.
• For FTP: Contact your system administrator.
• For SMB: Windows
®
login name that you have specified in "Setting
a User Account (SMB Only)."
Login Password Enter the password corresponding to the above login name.
• For FTP: Contact your system administrator
• For SMB: Empty password is not valid in the Network (Computer)
feature. Make sure that you have a valid password for the user
login account. See "Setting a User Account (SMB Only)."
Re-enter Password Re-enter your password.