User's Manual

200 | Loading Print Media
5 When the MPF Configuration screen appears, tap Size.
6 Tap or until the desired paper size appears, and then select the size.
7 Tap Type.
8 Tap or until the desired paper type appears, and then select the type.
9 Tap OK.
Loading Envelopes in the MPF
NOTE:
• Use only recommended envelopes. See "Recommended Envelopes."
The following guidelines describe how to load envelopes.
• Use only freshly unpackaged and undamaged envelopes.
If you do not load envelopes in the MPF right after they have been removed from the
package, they may bulge. To avoid jams, press firmly across the whole envelopes to
flatten them as shown in the illustration before loading the envelopes in the MPF.
• Use only same size envelopes for a single print job.
• The maximum height (quantity) of envelopes that can be loaded in the MPF is
approximately 5 mm (0.19 inch) (5 envelopes).
• When printing on envelopes, set the print media source to the MPF. From the print
driver, select Envelope for the paper type, and then select the correct size of the
envelope.
• Adjust the width guides accordingly after envelopes are loaded.
Feed direction