User's Manual

Loading Print Media |

197

12 Tap OK.

Loading Envelopes in the Tray1

NOTE:

• Use only recommended envelopes. See "Recommended Envelopes."

The following guidelines describe how to load envelopes.

• Use only freshly unpackaged and undamaged envelopes.

If you do not load envelopes in the tray right after they have been removed from the

package, they may bulge. To avoid jams, press firmly across the whole envelopes to

flatten them as shown in the illustration before loading the envelopes in the tray.

• Use only same size envelopes for a single print job.

• The maximum height (quantity) of envelopes that can be loaded in the tray is

approximately 27.5 mm (1.08 inch) (20 envelopes).

• When printing on envelopes, set the print media source to the tray. From the print

driver, select Envelope for the paper type, and then select the correct size of the

envelope.

• Adjust the paper guides accordingly after envelopes are loaded.

Envelope #10, Monarch, or DL

Load the envelopes with the flaps closed and the print side facing up. Make sure that the

flaps are on the left side when you face towards the printer.

When loading envelopes with the flaps open, load the envelopes so that the print side

Feed direction